Wireless in-car set up for Nexus 5 in Mercedes CLK320

I wanted to be able to conveniently connect my Nexus 5 phone to my car’s audio system so that I can listen to music, podcasts and navigation commands. The car is a 2005 Mercedes CLK320CDI fitted with an auxiliary input in the glovebox. If your car has an auxiliary input then there is no reason why this shouldn’t work for you.

Mercedes CLK3320CDI

I wanted something that was quick and convenient which, ideally, meant it could be done one-handed, with no need to plug or clamp the phone into anything. Ideally the solution should minimize any trailing wires or unsightly boxes stuck to the dashboard. It must also be possible to remove without trace.

The solution I settled on comprises a wireless charger and mount, a Bluetooth A2DP receiver and USB power for both.

Phone Charger and Mount

Model: Google Nexus QI Charger
Source: Google Play
Cost: £34.99 plus £3.00 postage
Description: Google’s own QI charger not only wirelessly charges my Nexus 5 but also holds it securely, using sets of magnets in both phone and charger. The QI charger is glued, with Araldite, to the stem of a windscreen mount that I already owned.

The charger is mounted to the right hand side of the steering wheel. It is easily visible but doesn’t impair the forward view. It allows me to neatly route the power cable across from near the gear-shift, taking it under the steering column, to the charger.


Bluetooth Receiver

Model: August MR220B (£8.00)
Source: Amazon
Cost: £8.00
Description: There is a wide choice of Bluetooth receivers available. I chose the August MR220B because I have been very happy with my August EP650 Bluetooth headphones. They are well built, sound great and pair well with my Nexus 5. No reason to doubt that the MR220B would be any different. One slight caveat is that it was impossible to find out, looking at the specs, whether these receivers will turn on when I start the car. It does, but it won’t automatically connect. The problem being that when I leave the car it loses connection and then turns it off. When I return to the car it needs to be reset. A simple switch off/on sorts that out, but I am still investigating alternatives. The Bluetooth receiver is mounted in the glovebox, powered by a cable running from just in front of the gearshift.


Power Supply

Model: Scosche 12W + 12W
Source: Amazon
Cost: £12.49
Description: The QI Charger needs a higher current than a standard 1A adapter can supply. After some searching I selected the Scosche 12W+12W adapter. This is very compact and has two USB outlets that will each provide 2.4A. One advantage of this more compact adapter is that it (just) allows the ashtray cover to close, tucking away the cables fairly neatly.


Total cost: £58.48


When all was installed I was getting some interference; a high-pitched whine. After some Googling and investigation I traced it to a problem with a ground loop. Adding a cheap ground loop isolator between the Bluetooth receiver and the aux input fixed that.

Automating the connection

The Android application Tasker is too broad to cover in a few paragraphs. It allows you to configure your Android phone to react to events and changes in the phone’s state.

I have the following profiles and tasks set up;

  • When charging wirelessly Tasker switches on Bluetooth, turns off WiFi, turns off auto-sync and sets the media volume to maximum.
  • When it stops charging wirelessly Tasker turns Wifi and autosync back on and then writes my current location with a date/time stamp, to a text file. This allows me to keep a track of where I’ve been and where I’ve left my car.
  • If an SMS or Whatsapp message arrives while the phone is charging wirelessly, Tasker reads the notification.

Profile for CarMode


Task for CarModeOn and CarModeOff

taskercarmodeon taskercarmodeoff

Profiles to read SMS (Hangouts) and WhatsApp

taskerhangouts taskerwhatsapp

Task to read notifications



Using Tumblr as a medium for easily sharing music and pictures

I regularly find that I need to upload a JPG or MP3 so that I can provide a link, either in support of a forum post or just to pass on something to a friend. I’ve recently hit on using tumblr.com for this purpose. The actual process of uploading is a piece of cake. How best to share differs.


When posting a picture in a forum I generally want to link to a scaled version of the picture. Thankfully, on the main tumblr feed, you get a perfectly sized version of your uploaded picture. Right click on it, choose “copy image url” (or whatever your browser offers you) and then paste that into the forum.


I’d previously used the excellent Soundcloud for this, and when it comes to audio where I want to paste a “gadget” into a blog post I’ll keep using that. However for the throwaway interim sketches or snippets of songs tumblr is perfect. There’s no embeddable gadget that I’ve found yet so I simply post the url. In best Blue Peter fashion, here’s one I prepared earlier.