Review of the Benford Custom – A Telecaster/Les Paul Hybrid


I’ve had the Benford Lestercaster a couple of weeks now and am in a better position to write up a more considered review than my babbling initial impressions.

Here I’m just going to try to discuss the guitar itself, rather than the extras that were included in the package, or the service that Steve Benford offered.

Benford Custom

Design and construction

The basic idea for the guitar was to build a Les Paul Studio that looked like a Telecaster. For the look, I wanted something sparse and classy that was just a mixture of plain satin finished wood and black hardware.

So it has a set/glued neck, 24.75″ scale length, tune-o-matic bridge and stop tail piece. Like the Les Paul, the neck is set at an angle of a couple of degrees to the body so that it clears the higher bridge.

The body wood is a piece of London Plane, a type of lacewood. The neck is mahogany. Fingerboard and headstock veneer are ebony.

Benford Custom


OK, let’s get it out of the case and pick out some of the details…

The black logo on the ebony headstock looks superb. Very understated. This was a touch Steve added without asking and just fits in perfectly with my aesthetic sensibilities. The finishing on the neck pocket and heel is just astounding – totally flawless – as is the finishing of the fingerboard and frets. A couple of other details of note are the countersunk controls and the two tail-end strap buttons. These were specified by me, but the execution of my ideas is exactly as I conceived them. The two tail-end strap buttons mean that the guitar will securely stand up against a wall or amp, but also gives the guitar a better balance when strapped on. Only a very minor point, but the upper bout strap button is placed about an inch too high for my preference. The matt black EMG-style covers on the Seymour Duncan P-Rails pickups complete the plain and simple look.

Unplugged sound

As is traditional in a guitar review, let’s give it a strum before plugging it in. First impressions are that it sounds very lively; almost jangly. I had expected a darker/warmer nature to the tone, and this was quite a surpise – not a bad one – just different to expectation. As you would expect with a set neck and high quality materials, the sustain is phenomenal. The only guitar I’ve ever played with more sustain was a thru-neck Westone Thunder (a very under-rated piece of kit itself).

Benford Custom

Plugged sound

I’d originally planned to go for plain old PAF humbucking pickups, although I did toy with the idea of P90s. When I mentioned this to Steve he pointed me in the direction of Seymour Duncan’s P-Rails. This is a pickup that combines a Fender-esque single coil, with a P90, that also gives series and parallel humbucker wiring options. The wiring scheme, taken directly from the Seymour Duncan website, offers an amazing range of sounds with a minimum of complexity. And from an aesthetical point of view, with no more than a pickup selector switch and two knobs, because I wanted to stay close to the Telecaster control layout.

It is a fairly traditional pickup selector, master volume and master tone, that’ll be familiar to anyone who has picked up a telecaster. The volume and tone pots each have push/pull switches and in combination to the work of selecting which of the pickup coils are used:

  • Both down – Humbucker with coils wired in series;
  • Volume down, Tone up – P90;
  • Volume up, Tone down – Single coil;
  • Both up – Humbucker with coils wired in parallel.

There are a couple of limitations with this wiring scheme:

  • No independent volume or tone for each pickup;
  • Not able to select different pickup type configs for neck and bridge at the same time, so, for example, it can’t do a bridge single coil plus neck series humbucker.

I preferred to accept this limitation rather than have additional mini-switches on the front.

When I had been thinking about using traditional PAF humbuckers, I briefly considered using concentric stacked volume and tone pots, so that I could put in a Les Paul type control scheme, but keep the look of the Telecaster.

The actual sound? Oh rest assured I’m absolutely delighted. It is such a versatile guitar. It can handle anything from razor sharp C&W twang with the bridge single coil to creamy PAF-esque jazz tones with the neck series humbucker – with almost every stop in between these two extremes. At the sharp end it is easily a match for my Telecaster although having this biting sound but still with the incredible sustain takes some getting used to.

Personal favourites are:

  • The bridge series humbucker through my wee valve amp with everything turned up to 10;
  • Neck humbucker through a clean amp for a warm, but still very clear and distinct, jazzy tone;
  • Neck and bridge P90s with the amp up full but the guitar’s volume rolled back just so it is on the verge of break up.

It is amazing how much difference the scale length makes to the feel of the guitar and it is taking quite a while to “recalibrate” my fingers. Bending strings is so much easier, without the string feeling “flappy”, even to the point where I can now do a whole tone bend on the A and D strings with my pinkie. This does have a downside because, on a more frequently used bend like a whole tone on the G string with my ring finger, I’ve now got a tendency to over-shoot and go too sharp. This is not just about the scale length though. The ultra smooth finishing of the frets has a big effect too.

One thing I may change eventually is the fret height. I specified Dunlop 6130 fretwire and whist the width of the fret wire is perfect, it is a fair bit higher than I’d thought it would be. This is not an issue above the 7th fret, but below that it shows up a flaw in my technique: my inclination to press the string down harder than is needed. If I hold a chord shape, say an open A, as I would normally, then as I press the string to the fretboard it is pulling the fretted notes sharp. Perhaps it is just going to require more personal “recalibration” and an improvement in my technique, so I’ll give it a few more months before I go for the more radical solution of getting the frets stoned flatter.

Benford Custom

The neck profile itself is a thing of beauty, and I’m not quite sure how Steve has achieved this. It feels both substantial and slim at the same time. Fast and solid and some bizarre hybrid of a classic baseball bat and Ibanez shredder’s neck. I think it is a combination of a fairly conservative depth (note the small “C” – real Conservatives are much thicker) and a slight “V” profile, although I don’t think the profile, in section, is symetrical. If forced to guess I’d say that the bass side of the neck is slightly rounder, and the treble side flatter. This no more than deduction on my behalf because I can think of no other way a neck could feel this substantial under the thumb and yet so fluid under the fingers. Of course the immaculate gentle satin finish also adds a massive amount to the neck feel.

For the first time since the Benford arrived, I picked up my Telecaster over the weekend. Despite this previously being one of the most playable necks I’d ever encountered, I was shocked by how hard it was to play in comparison to the Benford. The glossy laquer on neck and fingerboard just felt sticky and unpleasant. Way to go Steve – you’ve just ruined some of my favourite guitars for me!


As you can probably tell from the above, I’m a hugely satisfied customer. Just considering the intrument alone; if I’d walked into a guitar shop and bought this thing off the hook for under £830, I’d have considered that I’d got a damn good deal. When you add in all of the extras, the joy of designing it (with help and advice), the fact that it is a totally one-off original, the superb craftsmanship/care that has gone into every aspect of the build, I feel like I’ve walked away with the bargain of the century.

Benford Custom


2 thoughts on “Review of the Benford Custom – A Telecaster/Les Paul Hybrid

  1. That guitar is beautiful. I’d love to try it out. Is there a place in the US where I can get my hands on it?

Leave a Reply

Please log in using one of these methods to post your comment: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s